冠希实干阿娇13分钟视频在线,国产亚洲欧美另类一区二区三区,国产传媒京东传媒,亚洲人成网站18禁止大APP

This gauge is made of stainless steel and filled with oil, which is suitable for measuring the corrosive liquid.

Pressure Range：-0.1～200MPa
Accuracy：±1.5F.S.

This gauge corresponds to Japan JIS standard, and can be widely used as a general gauge

Pressure Range：-0.1～100MPa
Accuracy：±1.0～1.6%F.S.

This gauge corresponds to Japan JIS standard and has a sealed case. It is suitable for outdoor use and easy to read and operate

Pressure Range：-0.1～100MPa
Accuracy：±1.0～1.6%F.S.

High precision with outstanding anti-corrosion ability. Standard throttle available

Pressure Range：-0.1～160MPa
Accuracy：±0.5～0.6%F.S.

Galvanized case or stainless steel case can be selected, and mass customization is available

Pressure Range：-0.1～3.5MPa
Accuracy：±0.5～0.7%F.S.

This gauge is of anti-shock. It is filled in liquid to prevent the inner components from shock, and protect the inner connections from wear

Pressure Range：-0.1～200MPa
Accuracy：±1.5F.S.

This gauge corresponds to Japan JIS standard and has a high performance cost ratio and wide applications

Pressure Range：-0.1～50MPa
Accuracy：±1.6%F.S.,±1.5%F.S.

This gauge is suitable for the micro pressure measurement that pressure gauge of Burdon tube cannot measure. It can measure the pressure directly and measure the capacity quantity and liquid depth in a tank

Pressure Range：0～30kPa .
Accuracy：±2%F.S.

This small gauge is suitable for pneumatic instruments to ensure the compact structure

Pressure Range：0～3.5MPa
Accuracy：±1.5%～3%F.S.

This diaphragm is applied in varied pressure gauges and pressure switches.

Accuracy：±1.5%F.S./20℃±10℃

This gauge is of differential pressure type with sealed case

Differential Pressure:0～0.2MPa ;
Accuracy：±3%F.S.

The inner element is filled in liquid and can bear high pressure. It will not be damaged by the overpressure or reverse pressure that caused by valve operation

Differential Pressure：0～0.3MPa
Display Accuracy：±1.5%F.S.
Setting Accuracy:±1%F.S.

This gauge is suitable for measuring the differential pressure between two points, and also measuring the liquid depth and flow rate. Meanwhile, it can be used for warning and controlling.

Differential pressure ：0～1MPa
Display Accuracy：±2%F.S.
Setting Accuracy：±2%F.S.

This gauge is suitable for checking whether the filter of air conditioner is blocked by measuring the pressure variation

Differential pressure ：0～5kPa
Display Accuracy：±3%F.S.
Setting Accuracy：±3%F.S.

This gauge is suitable for measuring extreme low pressure, detecting the pressure loss caused by air conditioner filter, and applying in the flow meter and minute differential gauge.

Differential pressure ：0～100kPa
Display Accuracy：±1.5%F.S.

This gauge is suitable for measuring extreme low pressure, detecting the pressure loss caused by air conditioner filter, and applying in the flow meter and minute differential gauge.

Differential pressure ：0～100kPa
Display Accuracy：±5%F.S.

This gauge is suitable for measuring the low pressure under 4KPa, and measuring the flow rate and liquid depth since the measurement value can be converted to varied units

Differential pressure ：0～4kPa
Display Accuracy：±1.5%F.S.

This gauge is suitable for measuring the differential pressure between two points, and also measuring the liquid depth and flow rate. Meanwhile, it can be used for warning and controlling.

Differential pressure ：0～1MPa
Display Accuracy：±1.5%F.S.
Setting Accuracy：±2%F.S.

This gauge with electric contact has built-in reliable optoelectronic switches, and is mainly used for controlling the output of warning signal and switch of the relays

Pressure ：-0.1～35MPa
Display Accuracy：±2%F.S.
Repeatability：±0.5%F.S.

This gauge has built-in a micro switch and is mainly used for outputting signals when reaching the setting value, or giving a warning signal of buzz, or controlling the electrical machines and valves.

Display Accuracy：±1.5%F.S.
Setting Accuracy：±3%F.S.

This gauge has built-in optoelectronic switches, and is mainly used for controlling the warning device of the high-capacity switch

Pressure ：-0.1～70MPa
Display Accuracy：±1.5%F.S.
Setting Accuracy：±2.0%F.S.

This gauge has built-in contact switches in the indicator and is mainly used for controlling the warning devices including buzzer and indicating lights

Pressure ：-0.1～70MPa
Display Accuracy：±1.5%F.S.
Setting Accuracy：±2.0%F.S.

This gauge is of compact design and suitable for both oil pressure and air pressure

Pressure：-0.1～20MPa ；
Accuracy：±1%F.S.

This multi-functional digital manometer is of high accuracy and the setting value can be changed at any time since the upper limit and lower limit are set by dial switch.

Pressure：-0.5～50MPa ；
Accuracy：±0.3%F.S.

This multi-functional digital manometer is of high accuracy and it has multi-channels test function. It is widely used in varied automation equipments since it can display different units including flow or capacity.

Pressure：-500kPa ～50MPa；
Accuracy：±0.3%F.S.

This manometer is based on the precision semiconductor sensor and mainly used in gas industry. It is suitable for the laboratory and product line, where micro pressure tests are strictly required.

Pressure：0～±20kPa；
Accuracy：±1%F.S.

This manometer is based on the precision diaphragm sensor and mainly used for flammable gases. It is of high accuracy and strong reliability and suitable for product line, where micro pressure tests are strictly required.

Pressure：0-4900Pa；
Accuracy：±1%F.S.

This small digital manometer is of compact design and equipped with digital display and output function.

Pressure：0～±5kPa ；
Accuracy：±1%F.S. ～ ±2%F.S.

This digital pressure gauge has built-in highly reliable semiconductor evaporated type pressure sensor. Digital display , pressure transmitter and pressure switch are compactly integrated , and loop check and scaling functions are installed.

Pressure：±50Pa～ ±10KPA
Accuracy：±1%F.S.

This digital pressure gauge is of compact design and integrated of display function and output function.

Pressure：±50Pa～ ±10KPa ；
Accuracy：±1%F.S.

This micro-differential gauge has a built-in battery and appropriate for equipment and apparatus in the field of air conditioning and semiconductor industries.

Pressure：±50Pa-±500Pa ；
Accuracy：±1%F.S. ～ ±2%F.S.

This digital gauge has a built-in battery and appropriate for measuring the gas pressure and liquid pressure instead of mechanical gauges

Pressure：-0.1～ 20MPa ；
Accuracy：±1%F.S.

This is the pocket-size battery type digital pressure gauge which is used for periodic inspection and maintenance.

Pressure：-100Pa～1MPa ；
Accuracy：±1%F.S.

This gauge is of a wide measurement range and suitable for FA (factory automation) equipment;

Pressure：-0.1～1MPa
Accuracy：±1%F.S.

This multi-functional pressure gauge is of high accuracy and can be connected to varied sensors.

Pressure: 0～100kPa Display
Accuracy：±0.05%F.S.

This indicator can be cooperatively used with pressure transmitter and operated as indicator, transmitter and switch.

Pressure：0～50MPa
Accuracy：±0.5%F.S.

This indicator has built-in comparators and suitable for pressure measurement and control, and the indicating error can be eliminated effectively.

3.5 digits LED display;
Built-in power source with easy wring connection.

This indicator has alarm function and can be cooperatively used with varied temperature transmitters.

RoHS directive compatible;
85 to 264vAC free power source;
4 contacts for alarm output.

This tester is suitable for the inspection and calibration of high pressure (10-50MPa).

Pressure：1～5MPa；
Accuracy：0.1% ～0.2%F.S.

This tester is suitable for the inspection and calibration of high pressure (10-50MPa).

Pressure：1～5MPa；
Accuracy：0.1% ～0.2%F.S.

The tester is portable dead-weight type and that use a screw pump at pressurization and decompression.

Pressure：1～5MPa；
Accuracy：0.1% ～0.2%F.S.

This pressure is suitable for measuring semiconductor gases even under severe conditions such as corrosive atmosphere

Pressure：-0.1～100MPa
Accuracy：±1.5%F.S.

This pressure is suitable for measuring semiconductor gases even under severe conditions such as corrosive atmosphere.

Pressure：0～3.5MPa ；
Accuracy：±3%F.S.

This pressure is suitable for measuring semiconductor gases even under severe conditions such as corrosive atmosphere.

Pressure：-0.1～25MPa
Accuracy：±1.5%F.S.

This pressure is suitable for measuring semiconductor gases even under severe conditions such as corrosive atmosphere.

Pressure：0～3.5MPa ；
Accuracy：±3%F.S.

This gauge is based on the semiconductor strain gauge and has varied functions including comparator output, analogue output and loop check function.

Pressure：-0.1～20MPa
Accuracy：±1%F.S.

This gauge has built-in reliable pressure sensor and has a smaller size, clearer display, and wider measuring range.

Pressure：-0.1～20MPa
Accuracy：±1%F.S.